Cooling Systems
Slaughterhouse Cold Room Storage
WALL PANEL
Wall panels are produced by injecting polyurethane at a density of 40-42 kg/m3 between two sheets of galvanized polyester painted and ribbed sheets, as standard. Panel surface material is not limited to polyester and can optionally be PVC, CrNI, Plastisol or Galvanized Sheet. Thanks to the eccentric locking mechanism, the panels are tightly locked together to ensure minimum heat transfer during assembly.
FLOOR PANEL
Standard floor panels use 10 mm thick patterned plywood on the upper surface to prevent slipping, and 0.50 mm thick galvanized polyester painted sheet metal on the lower surface. Upon request, the upper surface of the floor panel can be produced using 0.5 mm thick CrNi sheet on OSB. Floor panels can withstand 1500 kg/m2 fixed and 200 kg/m2 live load. The panels produced can be produced in thicknesses of 50-80-100-150-200 mm, with a fixed width of 1110 mm and up to 13 meters in length. Thanks to the eccentric locking mechanism, the panels are tightly locked together to ensure minimum heat transfer during assembly.
CEILING PANEL
Ceiling panels are produced by injecting 40-42 kg/m3 density polyurethane between two galvanized polyester painted and ribbed sheets as standard. Panel surface material is not limited to polyester and can optionally be PVC, CrNI, Plastisol or Galvanized Sheet. Thanks to the eccentric locking mechanism, the panels are tightly locked together to ensure minimum heat transfer during assembly.
Cooling Devices
HERMETIC SPLIT TYPE
Split Type Hermetic Condenser Units are suitable for cold rooms and aisle cooling with low capacity needs. Thanks to its small compact design, it is easy to install and maintain. Sound pressure values are at minimum level.
INDUSTRIAL TYPE COOLING
Industrial Type Condenser Units are suitable for industrial facilities with medium and high capacity cooling needs. Compact design, it is easy to install and maintain. Efficiency is at a high level in our cooling devices where high capacity compressors are used.
SCROLL SPLIT TYPE
Sound and vibration are at low levels in Split Type Scroll Condenser Units. It is especially suitable for market and supermarket applications. Energy consumption is at a minimum level with energy efficiency applications.
SHOCK COOLING UNITS
It is suitable for applications where long-term or short-term frozen preservation is required and products are required to be reduced below freezing temperature in a short time.
SEMI HERMETIC SPLIT TYPE
Split Type Semi-Hermetic Condenser Units are suitable for low and medium capacity cooling needs. It offers wide selection options thanks to its wide capacity ranges.
CENTRAL COOLING SYSTEMS
Central Systems are suitable for industrial cold storage facilities and supermarkets with high cooling needs. It is shipped with the condenser separate or on the system. It offers a wide selection range in capacities with 3, 4 and 5 compressors for semi-hermetic compressors and 4 to 12 compressors for scroll compressors.
Sliding Cold Room Door
HIGH ENERGY SAVING WITH RESISTANT ALUMINUM PROFILE
CTP composite construction
1.5 mm AMB (antimicrobial) FRP, painted sheet metal or stainless surface
EPDM rubber based seal system
Seamless surface when using 1.5 mm AMB (antimicrobial) FRP
Desired color option on the door leaf
Door leaf and frame are made of anodized aluminum that prevents heat transfer.
Door leaf, high pressure polyurethane injection with a density of 42 kg/m³
220 volt, 25 w/m silicon based resistance on frozen storage doors
Aluminum profile with resistance on the floor
Automatic Sliding Cold Room Door
CTP composite construction 1.5 mm AMB (antimicrobial) FRP or painted sheet metal surface
EPDM rubber based seal system
Seamless surface when using 1.5 mm AMB (antimicrobial) FRP
Desired color option on the door leaf
Door leaf and frame are made of anodized aluminum that prevents heat transfer.
Door leaf, high pressure polyurethane injection with a density of 42 kg/m³
220 volt, 25 w/m silicon based resistance on frozen storage doors
Aluminum profile with resistance on the floor
Automatic walking system, pinion-connected rack and pinion
Photocell system that prevents being locked in the room
Controlling the door with the remote control
Manual operation system in a non-electrical environment
Automatic time setting on the control panel
FRP composite material
1.5 mm AMB (antimicrobial) CTP, painted sheet or stainless surface
EPDM rubber system
Desired color choice in door blade.
Monorail Sliding Cold Room Door
Anodized aluminum that prevents heat transfer for the door frame and blade
Door blade: 42 kg/m³ density high pressure polyurethane injection
Monorail system on door and frame
Polyamide protecting door blade in articulated system
FRP composite construction
1.5 mm AMB (antimicrobial) FRP, painted sheet metal or stainless surface
EPDM rubber based gasket system
Seamless surface when using 1.5 mm AMB (antimicrobial) FRP
Desired color option on the door leaf
Door leaf and frame are made of anodized aluminum that prevents heat transfer.
Door leaf, high pressure polyurethane injection with a density of 42 kg/m³
Articulated and fixed monorail system suitability
Polyamide part protecting the door leaf in the articulated system
Stainless surface profiles suitable for fixed monorail system
HINGED DOOR
Anodized aluminum that prevents heat transfer for the door frame and blade
Door blade: 42 kg/m³ density high pressure polyurethane injection
1.5 mm AMB (antimicrobial) CTP, painted sheet or stainless surface
Desired color choice in door blade
Door lock that can be opened from inside (evenlocked)and outside
Rising and adjustable hinges
EPDM rubber system
220 volt, 25 w/m silicone based resistors on frozen storage doors
Door leaf and frame are made of anodized aluminum that prevents heat transfer.
Door leaf, high pressure polyurethane injection with a density of 42 kg/m³
1.5 mm AMB (antimicrobial) CTP, painted sheet metal or stainless surface
Desired color option on the door leaf
Door lock that can be opened from inside and outside
Rising type hinge
EPDM rubber based seal system
220 volt, 25 w/m silicon based resistance on frozen storage doors
DURABLE WITH ITS CTP COMPOSITE STRUCTURE
DURABLE WITH ITS CTP COMPOSITE STRUCTURE
Door leaf and frame are made of anodized aluminum that prevents heat transfer.
Door leaf, high pressure polyurethane injection with a density of 42 kg/m³
1.5 mm AMB (Antimicrobial) CTP, painted sheet metal or stainless surface
Desired color option on the door leaf
Door lock that can be opened from inside and outside
Rising type hinge
EPDM rubber based seal system
220 volt, 25 w/m silicon based resistance on frozen storage doors
Door frame is suitable for monorail system
Single wing fixed operation.
Door leaf and frame, anodized aluminum
Door leaf, high pressure polyurethane injection with a density of 42 kg/m³
1.5 mm AMB (antimicrobial) CTP, painted sheet metal or stainless surface
Desired color option on the door leaf
Rising type hinge
EPDM rubber based gasket system suitable for the wing profile
Plexiglass door leaf glasses with EPDM rubber seals
Hinged that can be opened in and out and fixed at 90º when necessary
Shock absorbing PVC protection tape